I’ve previously reported problems with MAC duplication on Hyper-V host external network connections on Windows Server 2008 R2, which I’ve never fully resolved, although we have been successfully working around the issue as detailed in the first link above.
A couple of weeks ago I was working simultaneously on my Windows Server 2008 R2 laptop with Hyper-V (the same laptop build that’s been previously mentioned) and a Windows 7 x64 build that I was using for testing, when I noticed severe but intermittent network problems on both machines. After a fair amount of head scratching, I noticed that the two laptops had duplicated MAC addresses. Blatantly that shouldn’t happen, as the whole point of a MAC address is to provide uniqueness. The most perplexing issue was that the addresses conflicted across two different operating systems. However, it happened. Both wired adapters on the two machines had the MAC address 00-21-9B-DC-8E-0B. I uninstalled the wired adapter on the Windows 7 machine and scanned for new hardware. When the device reinstalled the problem went away. Continue reading “MAC duplication issues with captured VMs and WDS”
In the first five parts of this series I covered the project objectives and the system design, then turned my attention to the Hyper-V host image build, automated deployment and the guest virtual machine build. In this post I review some of the questions and issues we’ve encountered after a few months of working this way and some overall reflections on the approach. Continue reading “Building a SharePoint 2007/2010 development environment — Part VI: Issues and Results”
In the first four parts of this series I covered the project objectives and the system design, then turned my attention to the Hyper-V host image build and automated deployment. In this post I describe a SharePoint 2007 virtual machine build.
Where’s the SharePoint 2010 build?
In short, we’re working on it. I’ve produced a new SharePoint 2010 beta virtual machine for this environment but we’re not yet ready to publish build guidance. Stay tuned. Additionally… Continue reading “Building a SharePoint 2007/2010 development environment — Part V: Guest Build”
The answer, obviously enough, is that it can if it has Silverlight installed. Read on if you’re interested in how the web part will behave in its absence.
Continue reading “Can a hardened server play a SharePoint 2010 Silverlight Media Web Part?”
In the first three parts of this series I covered the project objectives and the system design, then turned my attention to the Hyper-V host image build. In this section I will look at automating deployment of that host operating system. This is lengthy, but there’s a lot to cover.
Continue reading “Building a SharePoint 2007/2010 development environment — Part IV: Automated deployment”
Having agreed the project objectives and designed the system, I turned my attention to the Hyper-V host image build. This is a high-level build guide with start-up time and baseline memory consumption benchmarks at key milestones. These benchmark figures were taken from the Windows Server 2008 R2 Release Candidate build and are admittedly a bit imprecise. However, they do provide an overall indication of system performance as things were added to and removed from the installation. Although I do not have precise figures on RTM improvements, I spot-checked a few of these benchmarks when I rebuilt the system on RTM. Start-up times improved slightly at each milestone. In fact, the final benchmarks came in at 100MB less idle memory used in the RTM release. Continue reading “Building a SharePoint 2007/2010 development environment — Part III: Host image build and performance benchmarks”
In the first part of this series, I introduced the pros and cons of various SharePoint development approaches and the objectives of this system redesign. In this part I will focus on design choices and conclusions, starting with the core technology.
Why we’ve chosen Hyper-V
There are broadly five decisive factors: performance, management features (like snapshots), cost, 64-bit OS support and a full host OS (not just a virtualisation administration console): Continue reading “Building a SharePoint 2007/2010 development environment — Part II: Design”
As I’ve alluded to a few times in this blog, over the last few months I’ve led the consultancy and system design for a SharePoint 2007/2010 development environment built on Hyper-V in Windows Server 2008 R2. This series of six posts will reveal the key decisions and will consolidate recommendations from a broad range of research and guidance. This first post offers a technology-agnostic introduction to the problem, pros and cons of alternative approaches and what we hoped to achieve with the new approach. The design decisions will be covered in more detail in the second post, followed by a deeper look at detailed build guidance. Continue reading “Building a SharePoint 2007/2010 development environment — Part I: Introduction and Objectives”
Further to my post from a few months ago on the this topic (dating back to the RC build), I’ve seen this same problem a few more times on the RTM build of Windows Server 2008 R2. My suggested approach still fixes the problem and it doesn’t recur, but I’ve still not been able to pin down a cause and I can find no documentation on host machine MAC assignments anywhere. Continue reading “More on routine loss of external network connectivity on Hyper-V hosts (not guests)”